LiftAngle51
6481
Gamble
I bought my first vintage watch.
They warn me about going into vintage, so i keep a gap that my purchase can be a disaster.
It is a mass produced Bulova, and i can not wait to see it in the flash.
White dial, 24h dial, grey strap, no crown, 35,6mm case, red second hand, plenty of details to enjoy.
My love affair with LF is slowly waning
Just after I posted a picture of this watch all of a sudden I noticed it there’s a piece missing in front of the crown. On top of that it still makes a clicking noise. This has already been sent to Switzerland once. It’s getting a little old. ...
It's a brand that, to me, had wow factor at the beginning...
But like a lot of other hype driven indys, the more you look, the less there is to like. Sorry to hear about this. I hope LF takes care of you.
The same i thought this week
While i was admiring my mass produced made watch, many independents are hypes and prisoned by fashion. Daniel Roth, and when i thought Speake Marin it is different cause nice watches.
It's easy to criticize mass produce watches
But to me they are much more convenient. You have a lot less to worry about if something goes wrong. I'll take reliability over hand made exclusivity any day.
Gamble
I bought my first vintage watch. They warn me about going into vintage, so i keep a gap that my purchase can be a disaster. It is a mass produced Bulova, and i can not wait to see it in the flash. White dial, 24h dial, grey strap, no crown, 35,6mm case, r...
As long as risk is calculated it's not a problem
Enjoy your new Bulova! Let us know when you get it!
Is it normal practice to have a 2-piece crown?
...seems like something is bound to go wrong...
Maybe...but adding a stone to the crown seems to be a category of its own...
...I'd like to see the original, intact LF crown.
Thank you…
…if there is no need to access anything under the cap then this seems to be sub-optimal engineering. Just make it solid. If you’re trying to save weight (pointless imho) then use a decent welding/adhesive method.
Disappointing
The words a Monday morning product is telling me, stay away from LF. I feel the disappointment in your post Tony. I must be very lucky that every watch in my collection have no failures at all.
Sorry to hear, not nice when these things happen
I'm a bit surprised with the construction of the crown, and the look of the inner part. I do hope that it is sorted soon and you can enjoy the watch! Cheers!
Dear Tony, sorry to know that.
Don’t let it spoil your wonderful weekend. Let LF handle this and put your other goodies on wrist 😊
This crown would be great if you needed a place to hide the microfilm...
Otherwise I can imagine your surprise!
I feel badly for you and appreciate the frustration. I hope LF can make it right for you.
One problem I understand, but a second in a relatively short period of time after having to be without it during repairs is tough to accept, especially when an inexplicable sound persists. I get it. I wonder if it’s indicative of the brand or simply incre...
Oh no! LF will ask if you've knocked or bumped the watch on something...
LF will first ask us all not to make hasty assumptions that it's LF's fault and that it might be something you did. So they'll ask you if it's possible that you knocked the watch or bumped it. If you say no, they'll ask if it's possible if your dog or cat...
I guess I'm okay with fragile designs...
I'm really careful. In a crowded place, I'll cover my watch with my hand if I'm wearing short sleeves. Or I'll roll my sleeves down. I'm generally super careful with my watch. Although I understand not everyone is as careful as I am. My daily user of 10 y...
Uh oh! Ambivalence is not a good sign!
Seems like the love is over! Ambivalence is definitely not a good sign!
'On top of that it still makes a clicking noise'
please give more details-as this is a 3 hand manual wind watch. does it click all the time or just when you wind it? does the watch keep good time keeping?-(this will be a problem if there is a fault.) does the mvt hack? look through the glass back with a...
Why is it hollow?
I am sure LF would be able to rectify without any difficulty and hopefully at no cost too. I would not have expected the knob to be manufactured this way. Hope it all turns our well soon! My AD has also been recommending LF for a while but after handling ...
That’s really unfortunate.
Not sure I understand why they would manufacture the crown like this. Cannot imagine it would be for cost reasons as that would be a saving of, quite literally, a few dollars if that. As all LF watches share the same crown - would it be hollow in all of t...
There are these type
issues with many of the independents. Not sure why, except so much hand work may have something to do with it. Don't give up on the watch or the brand.
I am with you, Tony...for what they charge for watches, and I mean all of the manufacturers...on expensive pieces...
Whether mass production or independent-they should be close to flawless...I would certainly disassociate myself from the brand if it were me...you should get a replacement watch or they should take it back...no excuse...and don’t get me going on why they ...
While I have never been a fan on LF, despite liking the aesthetic of the watches…
…let’s wait and see how they respond. I am hoping your communications with LF don’t get anywhere near the dialogue Patrick referenced. I do agree with others above, for Indies generally we expect more and we should expect more. This is serious money, and ...
Sometimes
our beautiful hobby (better: passion!) can also be frustrating. And sometimes a relationship just doesn't work out. Valid for humans too! But it's not quite there yet. I would just give LF another chance. But that was it with patience and understanding. A...
I share your frustration, hope it ends up soon
For this kind of indie manufacturer, I expect perfection. Or close to it. I also expect a super customer service, regardless if its client fault or not. I EXPECT the watch to be 10 levels higher in quality and reliability. want a 2 parts crown? OK, but ma...
It’s not the end of the world
Everything that’s mechanically built is meant to malfunction at some point. But it also means that it can be repaired. This “setback” shouldn’t stop you from enjoying your hobby. A little trip to the spa would sort it out. Besides, there are only a number...
Sorry to see this
I would personally be a little upset too, since it is the second (or third) issue you've had. If it is a watch I really like, I try not let reliability issues get in the way of enjoying it. Sometimes the issues pile up or communication is poor and I lose ...
I would feel cheated by the brand.
LF watches certainly are good looking. But, your experience is more than enough to keep me away. When the price says exceptional quality, that is what the buyer should get. And these issues seem to be more than one-off or excusable mistakes.
is there an update on this thread?
Asking because I am seriously contemplating putting in an order for this model, but this single thread had caused me to demur (now thinking of pursuing a Moritz Grossmann or Gronefeld instead).