dahar90
29
Good point!
I have decided to have it serviced as well. Service and repair will be done with PP in Geneva. I actually ended up speaking to a watchmaker at their salon/head office and I’ll be meeting with him to hand over the watch. He appreciates the backstory and the customer service was superb. I’ll also be able to get a tour and see all the models in their salon. From what I hear it’s not to easy to get in and do that, so looking forward to the experience!
3445 - thoughts on repair and service
Hi All, I’ve got a 3445 Calatrava in full 18k yellow gold (band and case) handed down from my grandfather. He bought it circa 1970 and was his daily. He would have worn it till his passing in 1997 and was sitting in a drawer until 2018. I don’t think it’s...
In this case the manufacturer is
your best option. It should be cleaned and serviced. Do not let them polish it.
It’s already been previously polished per your account above, correct?
In general, collectors prefer to avoid polishing because it removes a small amount of the original metal layer and in order to maintain the original “integrity”/condition of a watch…unless it is in really bad shape and needs the polishing. In the case of ...
It has been polished 2 years ago
Thank you! This makes total sense and is like a gold ring…got it! I had the band slightly shortened (cut) a couple years ago and they polished it after they worked on it.
Have it serviced by PP...
If you can't trust them to fix it, who else can. Don't worry too much. As for polishing, i'm still trying to get my head around the prevalent advice against doing so for myriad reasons. End of the day, if you do not intend to sell the watch and you feel h...
Shouldn’t be an issue typically
The most common issues that arise if you never service it: gaskets dry out and crack. Lubricants become gummy and slow mechanisms. I’m sure others here know far more, but those are the general problems
Unfortunately i don’t have the answer. Best to send it in to the service center for PP to appraise and assess the extent of service required.
Personally, i do not think it is an issue if it has never been serviced. On polishing excessive amount of gold, really depends on how many times and extent of the polish done over its lifetime. PP can advise. Good luck and keep us posted on the outcome. H...
Been there done that
Serviced a40’s Calatrava by Patek. Putting costs aside. They will give you detailed quotation, and you can pick what you want (like polish or not). The will fix it with spec parts, like correct crown and glass, even gold spring bars. AND you will get a Pa...
How much was your service?
They have quoted me for the service/glass, so long as nothing else is damaged which I don’t think it is. Do you regularly service it or was yours a once in a long time service (like mine)? I guess I’m concerned once they fiddle with it it’ll never be the ...
sure. This one is the 2800eur quote.
final was 2800EUR as well. will search my files later This is for a vintage calatrava , small second They did great case restoration and hands work ...
Did you have to pay upfront?
Curious as to whether you pay once the work is done, and possibly inspected? I’ll be dropping the watch off in person. Thanks for sharing. Was your watch in good condition? I see it says it needed a new crown, case repair etc. I’m no expert but my watch I...
I would respectfully suggest that you have it serviced by Patek.
I own a 3445 and had it serviced at Patek Singapore. I believe due to the age, the watch would have been sent to Geneva. Can confirm that they did a good job. However I did not polish the watch. 3445 contains a simple automatic movement and Patek have the...
was it dropped on a concrete floor or a carpeted floor?
i would not be surprised that the case could be damaged and cracked as the case would have flexed to break the glass-if you have a loupe please check. dropping a watch on its crown-could also damage the winding and motion/setting works for the hands-have ...
By the case do you mean the actual watch metal case?
Silly question but how could the good case crack? I’ll double check tomorrow but at the time had a good look and couldn’t see any other damage. Mhmm that’s a good point. Now that I think of it I’m not sure if it was a direct hit on the crown. However, the...
What an awesome watch!!!
It’s so cool to see this in the white gold version (or platinum?)! Amazing. Do people ask you about the watch when wearing it? Also I noticed your says “Beyer” on the second dial…and mine doesn’t. Any idea what that is? Was it also a long wait to get the ...
I am embarrassed to say that I have never worn the watch.
The bracelet was cut for a wrist slimmer than mine by the previous owner. I keep it because it is beautiful and I do not have the heart to part with it although I do not use it. Also I keep it to inspire me to lose weight in the hope that I would be able ...
Thanks for the explanation!
It’s a great looking piece, so even if you’re not wearing it, still awesome to have. Hopefully one day you get to wear it keep your head up and you’ll get there!!! Thanks for the costs.
you can use a wide felt tip pen on the yellow gold case
where you can check for any-'cracks' in the case. the ink will show up any cracks-use a black felt tip pen.
Is your band “from origin”?
So I dropped the watch at PP a month ago. A couple days ago got the quote - 1500CHF so pretty happy with that (will post more on this shortly). But they said the band is “not from origin” as in not original. This is crazy as I have the papers and my grand...
One of the distinctive features of the 3445 is the very sharp pointed bevel on the top of the lugs. When a 3445 is polished the top of the lugs tends to become more rounded
and for me that greatly diminishes what made the 3445 special. Perhaps Patek can polish it in a way that avoids this pitfall. Perhaps not. I would proceed with caution if you are thinking of polishing this watch.
I think I’ll steer away from the polish
Thanks! Will just go with the service and repair.
If it hasn’t been serviced since the '70s...
The oils inside could be dried out, which might lead to issues down the line. I’d lean towards getting the service done—especially since you’re already looking at a repair for the cracked plexi. Just make sure to choose a trusted watchmaker who has experi...
Good point!
I have decided to have it serviced as well. Service and repair will be done with PP in Geneva. I actually ended up speaking to a watchmaker at their salon/head office and I’ll be meeting with him to hand over the watch. He appreciates the backstory and th...