Fastwong
409
At this point AP probably spends more man hours finishing bracelets than movements 😂
The offshore really gets shafted for the $ imho. Stamped dial, steel vs white gold bolts, rubber strap (usually), chrono module on an undersized movement, I do like the aesthetics of the ROO and have thought about getting one as an ultimate beach watch but it kinda feels like AP tries to give you less for more with the offshore.
Royal Oak Offshore movements are machine finished and not hand finished?
I watched a recent video by Tim Mosso from Watchbox where be reviewed a new release of an Offshore and in the video he said that AP ROO movements are hand assembled, but machine finished. Is this true? Does AP really not hand finish these movements? It is...
Exactly. I have been purchasing Offshores for years and could care less.
Never expected they were hand finished; in no way diminishes my interest.
We shouldn't get too worked up when brands talk up their own credentials; branding is about bending reality.
In the case of Audemars Piguet, they also use movements developed for them by Vaucher Manufacture. This facility is part of the Parmigiani group in Fleurier, and supplies many high-end brands. Another Parmigiani facility builds and finishes dials for bran...
AP and Vaucher
My understanding is AP uses the Vaucher base cal. 3002 on its new 34mm ROs, and has exclusive customisations done to it.
Hi, Re: AP and Vaucher, I based my remark on the review by Monochrome Watches
Source: "Hands On - Audemars Piquet Royal Oak Self-winding 34mm," dated 7 Oct 20. The Audemars Piquet website states only that this new release operates on a self-winding 5800 caliber. It does not mention where the base caliber is from. This is one exampl...
As far as I know, yup
the only ones that get a substantial amount of hand finishing are the Jumbos. As our other colleagues have pointed out, pretty much standard practice for all but special models or small scale manufacturers.
At this point AP probably spends more man hours finishing bracelets than movements 😂
The offshore really gets shafted for the $ imho. Stamped dial, steel vs white gold bolts, rubber strap (usually), chrono module on an undersized movement, I do like the aesthetics of the ROO and have thought about getting one as an ultimate beach watch bu...
Transparancy
Many crafts are a secret. It stop copying from each other. Transparency is important, but it can take away some magic. The same as an illusionist tell the trick.
Tim Mosso speaks the truth...
It's all those Patek Philippe fan boys and Audemars Piguet fan boys who spread incorrect information and assume that because it's got a reputable name on the dial that things are always good. A lot of the AP RO Offshore Chronographs are just generic Frede...
Haha, I'd take the f piguet movement, that's a great moment, but I think that's the royal oak chronos.
I think the offshores get a dubois chrono module 😂😭
Most Pateks are only machine finished, from time only through annual calendars, at least. At the upper end, both AP and Patek have some handwork.
Meanwhile, an entry-level Breguet dress watch, the 5177, has two interior angles as a little sign to those in the know that they do finishing by hand. Lange, of course, does hand finishing as well, so some brands are keeping the traditional skills alive.
Interesting insight. With all due respect to Breguet, at the end of the day, i would say the PP finish looks much more spectacular ("shiny")
But ill respect Breguet more, after learning this.
This is not necessarily true anymore, unfortunately
In some 5177 movements (I'm unsure if this applies to all new 777Qs), the interior angles are now replaced by rounded ones which are likely done by machine. This can be seen in this video at 0:41, officially from Breguet: Regards, skyeriding
I think this is just the video, not a change in production.
Here's an actual picture: We're not taking about Dufour, the interior angles are hand finished in both cases, though. Just here they are more shallow on the entry level Breguet. Also, it is likely the hand finishing on this Breguet is just that: The finis...
There are some 777 movements with defined interior angles, but there doesn't seem to be a pattern with the varying levels of finish
This example below, taken from the deconstruction by The Naked Watchmaker , showcases two defined interior corners on the 777 movement. While admittedly not the cleanest execution, shows some of the effort needed by hand to execute the anglage. The anglag...
I appreciate you taking the time to look more deeply into this, it's part of what I love about this community.
And I have a possible proposal for why very recent examples of the 777 movement line look a little better than earlier ones, such as the Hora Mundi example: Breguet is upping its finishing game. The skeletonized tourbillons are part of this. They require,...
I think now it all matters how you choose to represent your brand and/or model through a great celebrity and superlatively correct marketing!
I'm learning a lot here nowadays ☺️. Thanks for initiating the discussion.
Just to explain this in a bit more detail....
When people talk about machine finishing, what they're typically referring to is the anglage on the bridges. Machine finished anglage will often look flat and may have slight vertical striations visible left over from the machining process. What you ideal...
The real crime here is the opacity of the term 'hand assembled'
It's not factually false, but its not true to its implied meaning to the average watch buyer ether. The companies like to maintain the illusion of some decades experienced watchmaker obsessing over the perfect assembly of your 'precious'. Mass production ...
machine finishing is actually preferable
for a uniform perfect finish to eliminate irregular aspects from hand held tools. I suspect few if anyone hand finishes plates these days.
Hi, we are touching on the reason Patek left the Geneva seal when they increased their production by 11 times or more
The Geneva seal requires that hand finishing be a final step to remove all machine finishing marks such as those helpfully pictured earlier in this thread by jleno. Patek avoided the work and expense and craftsmanship by abandoning this step in a majority...
Patek Philippe also avoids chronometry trials these days.
It's quite a change. In the late 19th century it would enter observatories and trials, and win. Its performance chops were part of its allure. Perhaps it's the increase in volume that you mention, added to its pivot to stressing heritage and exclusivity, ...
