DonCorson
[AHCI]
3358
Learning experience...
Life is a learning experience.
All reasoned opinions are valid opinions.
But we all have seen different things up 'til now.
I have been surprised recently to see the amount of machine finishing on expensive watches.
How many people have really held a Voutilainen or a Dufour or even a
Gauthier in the hand and examined it closely to see what hand finishing
really means?
For me the give aways for machine finishing are exactly the sharp edges, the hard points, the perfectly flat angles.
I want to say they cannot be done that way by hand, but maybe someone will find a way.
Let's say that todays hand finishing is softer, rounder, warmer.
That is exactly the warmth that makes viewing a Voutilainen movement such a vibrant experience.
But that is my humble opinion and if others prefer the hard sharp
cornered look, show me the pictures and tell me why you like it so
much. Try to win me over.
It is a different esthetique.
It isn't hand finished 'though, if that is what you want.
Don
Tourbillon Incliné 24s
I think I didn't post these pictures when I took them several months ago. If I already did it, sorry ! Maybe my fav Greubel-Forsey watch ! I hope to see it again at the Salon Belles Montres. Fr.Xavier...
forgive me for being honest..
but i saw that piece, the double tourb and the other 30* i believe it was at an AD... asked for a loupe and spent quite a bit of time with it and i was not very impressed with the finishing on the movement to be honest.. the tourb was gorgeous and the way...
Note that the finish on the GF is not the 'usual' Geneva stripes
and involves considerable work. As far as I have ever seen, and I have seen a few GF watches, their finishing is second to none. Their bevelled edging and polish (on the surfaces that require it) is peerless and hence am wondering what area of the watch y...
....parts i wasnt fully impressed with..
i understand no geneva stripes...and im sorry for my lack of exact terminology... the beveled edge has inconsitencies and the corners were not as crisp as i feel they should be....in some areas's the corner seemed almost rounded off... other areas such as...
again sorry for my bluntness
nothing against GF in any way, i feel that maybe i was being to harsh given the nature of their pieces and constructed and assembled im sure by hand which would then lead to small flaws..... but then again i have seen other pieces such as a friends dead s...
Nothing wrong in expressing an opinion, however, if we look at one of their movements
magnified, you can note how the finish may not look exact as the polished surface meets the 'frosted', but the anglage and bevelled edges are perfectly done and exact. Note the reflection of one angle in the polished edge of another plate. All angles are ...
Great pic Andrew
I too respect Greubel Forsey's standard of finishing, the frosted plates are subtle yet exude quality. I am surprised to see them compared unfavourably to Journe, while his finishing has improved since the atrocious finishing of his early brass movement p...
i guess I am not at the same level then...
and maybe my inferences were not justified and were more led by opinion on most factors.. as i guess even the crisp'ness of a corner could be related to opinion versus fact... the journe dead seconds tourb i viewed was actually at a location with a master...
I hope you continue to give your opinions
There is a notable reluctance on these boards to say anything critical, and sometimes the messenger gets shot, metaphorically speaking of course. Or ignored, if you're not one of the "regular crowd." Usually what few critical comments there are have to do...
Nice post...
I like the sentiments, and would go along with much of it. I've never been a fan of uber-finishing, and uber-mega-extreme-finishing leaves me cold. I admire the skills, wonder about the mental state of someone willing and able to do it, but couldn't care ...
I agree with your comments, Nick, and those of ALBCWC, within the
context of the words in your posts. albcwc, your observation that there might be a reluctance to be "critical" on this site, is well founded and I too worry about this. So much so that I am often in the awkward position of trying to TONE DOWN by balancing...
Nothing wrong at all to voice your opinions but...
"There is a notable reluctance on these boards to say anything critical, and sometimes the messenger gets shot, metaphorically speaking of course." Nothing wrong at all to voice your opinions as a matter of fact it's ENCOURAGED (that's why we have the for...
Taking things too personally
goes both ways IMO. I also have a slight problem with having to qualify one's opinion in some ways. An opinion is just that, and to say that someone has to have certain knowledge and experience to express one without getting "shot" as another poster expre...
Now I'm really curious...
So opinions can exist in a vacuum, and one opinion is as "good" and "sound" as another? Knowing the "context" of an opinion doesn't help "understand" the opinion? Also, I'd really like to understand what you define as a "collection" and wonder if your "op...
Sorry but that's not what I said
I did not say that context is of no consequence - how you arrived to that conclusion is puzzling and "now I'm really curious...." I guess I just like to give people the benefit of the doubt and not discount their opinions out of hand as I think has happen...
It seems we'll not reach any sort of "agreement" on this subject...
Hi, Al, "I did not say that context is of no consequence - how you arrived to that conclusion is puzzling and "now I'm really curious...."" You are right, you did not explicitly write "context is of no consequence." It seemed to me that such a conclusion ...
We may be closer than you think
However I get the feeling there is an agenda here and I really don't want to be a part of an attempt to discredit someone. I admit I may be way off base but I would think if there is some view that someone here is not truthful about what they own (you hav...
Al, clearly you are articulate and rational. You are betrayed by your words
and by your eloquence. As such, I am sure you are aware that you are fully as guilty, maybe more so, of what you are accusing us of - that of trying to "discredit" anyone. By simply making the public accusation, you have branded us. We (I) did no such thi...
Thomas
I agree that stepping back is a good idea - for both of us. Certainly I had considered contacting you in private regarding this discussion, and possibly if your initial reply to my post and the rather extreme conclusions you reached had been to me in a PM...
No, there is another reason why finish matters: it improves the
performance and longevity of the watch itself. If affects the distribution of the oil, how the parts act against each other, and hence the time keeping properties of the watch itself. Use this website to research the issue. For example, from here: general...
Finishing...
Hi Andrew, I think the point TCP was making is that the finishing of the acting surfaces is essential - meaning the finish of pivots, acting surfaces of teeth, sink holes, etc. And as the majority of these are to all intents and purposes not visible, I'm ...
I'm glad to see...
that the pics led to a very interesting discussion about this watch. Fr.Xavier
This is the reason why I am here reading...
...instead of there working. Opinions do not have to be based on anything - not knowledge, experience, nothing. You have a right to your expectations, judgement, whatever you want to call it, by no one else's but YOUR own standards. Trying to force your p...
