Timewarp
227
Application & drying
Hi, I would use a very fine nichrome wire to apply the Epilame solution as this would be a very fine coating on the surface. The in chrome wire is available cheap at a students stationery store. The nichrome is non reactive and comes fitted on a pencil like tool hence giving proper finger control.
On the drying / heating process I would add an infra red (heat) bulb to induce indirect heating and ensuring proper drying.
Please feel free to comment on my methods.
Tx.
Epilame application....
The application of Epilame is a delicate process. Incorrect application can trap moisture on the surface of parts, and if applied to pivots a powdery residue can occur. Cleaning and then rinsing parts. Eye dropper used to dispense Epilame. I use a barrel ...
I don't have a different method,
but I was very interested to read about yours. Thanks for the explanation.
Application & drying
Hi, I would use a very fine nichrome wire to apply the Epilame solution as this would be a very fine coating on the surface. The in chrome wire is available cheap at a students stationery store. The nichrome is non reactive and comes fitted on a pencil li...
Good method
The eyedropper is the way I was taught in watch school not long ago. We, however, used modified droppers- using a blowtorch, we heated and bent the tips at about 45 degrees from stock to aid in application. Otherwise, you are using the same methods we did...
epilame
I epilame the whole wheel and pallet, using an epilame bottle with basket. I dont use any heat, I used to but since epilame evaporates almost instantly it seemed unnecessary to me, and it works just as well. I dont epilame reverser wheels, I use Lubeta V1...
not a good idea to Epilame the pallet pivots
The Epilame rubs off over time in use and in the absence of lubrication can cause amplitude problems. The same applies for the girl as well. The only part of the pallet fork that benefits from Epilame is the stones. _john
wrong im afraid
It has absolutely no effect at all over time. If it did it would show within a matter of minutes considering the to and froing at 8 beats per second. Not sure what girl youre refering to either? When i was an intern at Omega, the entire movement was epila...
yes, ahem, the girl
Sorry about that. I was typing that from my phone and the auto-correct got the best of me. I meant "the fork". And yes, I'm aware that factories sometimes Epilame all parts in a movement, but they have a couple things going for them that the practicing wa...
Have you seen damage like this?
Hello chris 9, This is from a post here on the Purists, "Recommended Service Intervals" Watchtech forum. Thanks for joining the conversation. Kind regards Anthony ...
not really
I must admit I would have suspected corrosion due to the red colour. Why were pivots unaffected? As far as concentration of the epilame I guess it shows the importance of replenishing the epilame quite often in the bottle. Good info!