WatchProSite|Market|Digest
WatchProSite|Market|Digest

Officine Panerai

Change strap panerai

 

I need your help 

I have a panerai california . And recently a get a new strap.
but I don know how to change the buckle to the new strap .
I don't see any screws 
any advice welcome
Pepe

  login to reply
Suggested threads *beta
9 Comments view entire thread 

4 screws at rear of case

 
By: gazoz : November 16th, 2012-16:40
on each corner very simple good luck

tghanks

 
By: drjoseggarza : November 16th, 2012-16:43
Thanks but I am talking about the buckle best

look in the middle of pin

 
By: gazoz : November 16th, 2012-17:15
there should be a tiny screw

thanks

 
By: drjoseggarza : November 16th, 2012-17:29
Thanks again I do not see nothing Even I look with magnifying glasses I think tomorrow i will take to the store to not damage anything best pepe

The original buckle of the Cali is a..sewn in...one, hence no screws... :-) [nt]

 
By: sergio : November 16th, 2012-23:30

So that means you need to unstitch the stitching on the strap

 
By: AnthonyTsai : November 17th, 2012-10:37
put in the new buckle and then stitch the strap back up. A little too much work IMO so I'd just get a new strap and buckle :) Cheers, Anthony

Well, on the first 3646, you had to stitch the whole strap...

 
By: sergio : November 17th, 2012-14:11
on to the case since the lugs were soldered to it. The sewn in buckle is an evolutionary step forward already...hahahaha :-) Ciaoooo

thanks for your response [nt]

 
By: drjoseggarza : November 17th, 2012-21:12

I think

 
By: Jester : November 18th, 2012-06:07
he already got a new strap and just missing the buckle. Pepe, just measure the buckle end of your new strap carefully and get a new buckle that fits. Panerai do make 24mm & 26mm polished screwed-on buckle in same style as the buckle that came w/ your ...