Magnetic Errors

Hi All,

This may have been done to death.... certainly touched on in many posts..... but have any of you had problems with a modern watch becoming magnetized to the point that it needs rectification.

I can only say that I have never had a problem with Rolex or Omega over a 30 year period. I have also been working with and close to strong magnetic fields during that time.

Further, I believe that modern materials are not prone to magnetic influence.

I am aware of the 'Soft inner iron core" marketing by one maker, but I think that is an unnecessary cure, for a cold that you might never catch.... unless you work in a power generating plant or magnet factory.

Certainly, if buying a gold watch I would prefer to know that the weight I feel is from the gold case, not an inner iron case, back and dial.

I can understand that early watches right up to the mid to late 1900s had a lot of steel parts in addition to the steel springs, and they 'Might" build up some magnetic energy.

I also remember as I was growing up in the 60's that for a while on radio and TV advertising, just about every watch was marketed as 'Anti Magnetic' ..... and I am sure they did not have inner iron cores.... but those same adds boasted of watch's having 7 or even 9 jewels....WOW...... so also they were obviously not what we would consider HH.

So realistically.... with modern metals.... what are the chances of a watch becoming unreliable due to magnetic exposure?

Kindest regards,

Jack

💰1882 Marketplace Listings for Rolex›

definite issues for me

By: sancerre : October 27th, 2009-14:15

I have definitely had issues with laptops and automatic watches. I owned quartz watches for years without issues. Over the past couple of years I have tried two Oris models, and a Jaeger le Coultre. All three of them proved to be unreliable due to magneti...

They're real.

By: mkvc : October 27th, 2009-15:14

I have not had problems with watches becoming seriously magnetized (that is, off by hours per day), but I have noticed that movements are susceptible to being slightly magnetized, with magnetization changing their rate by 5 - 10 seconds per day. Some move...

Thanks... How can you tell if a watch becomes magnatized....

By: justpen : October 27th, 2009-22:53

Hi and thanks for your reply.. How can someone tell if a watch becomes magnetized. kindest regards, Jack

by observation or w/ equipment

By: sancerre : October 28th, 2009-08:35

It was really easy for me, all of the watches suddenly and dramatically lost accuracy. For example, instead of gaining a few seconds a day, gaining nearly a minute a day. If you take the watch to a dealer, they can easily detect if if has been magnetised ...

Kong started a thread on this

By: amerix : October 29th, 2009-02:24

with the title * Magnetism, Have We Missed Out The Obvious? Laptop-Users Be Aware! Date: Jan 26, 2008,10:33 AM which is a good place to go for a start! I demagnetised a watch yesterday that had been gaining 20 sec per day. Now it's down to only five. amer...

Hi Amerix...How do you demagnetize a watch

By: justpen : October 29th, 2009-06:34

Hi Amerix Tell me how do you demagnatize a watch. Kindest regards, Jack

by banging it on a table

By: amerix : October 29th, 2009-11:31

Well, what I do is to bring a simple and cheap "throttle" or inductance coil - one I have frequently employed to demagnetize the heads of tape and cassette reorders - by first plugging this longish oval device, with no moving parts, and which fits easily ...

Thanks Amery... I am now a wiser and happier man..

By: justpen : October 30th, 2009-16:05

Hi Amery, I am now a wiser and happier man.... . I am sure many screwdrivers have been pointed north and banged in the last 24 hours. kindest regards, Jack

Magnetic and soft inner core?

By: iceheller 1945 ✌️ : October 30th, 2009-02:32

I own a BALL WATCH Engineer HydroCarbon which uses the soft inner core to give the watch more shielding against magnetic effect. I constantly place my watch around labtop and some time stand infront of loud PS15 Nexo speaker and they still work fine. The ...