Greubel Forsey has just introduced the Balencier Contemporain Final Edition. Presented in stainless steel, this beautifully complex looking, but utterly deceptively simple watch (the only complication is a power reserve), represents the final Balancier Contemporain edition. Just a stunning piece.
I'll let the statistics and specifications (and the photos) do the talking. While the watch is not small nor thin, it is actually well sized for daily use - if you're not opposed to wearing a watch with some presence.
Enjoy!
MOVEMENT
MOVEMENT DIMENSIONS
•Diameter: 32.40mm
•Thickness: 9.20mm
NUMBER OF PARTS
•Movement: 256 parts
NUMBER OF JEWELS
•33
•Olived-domed jewels in gold chatons
Chronometric power reserve
•72 hours
BARRELS
•Two series-coupled fast rotating barrels (1 turn in 3.2 hours), one
of which is equipped with a slipping spring to avoid excess tension
•Barrel with relief engraving «Greubel Forsey»
BALANCE WHEEL
•In-house variable-inertia with 6 gold mean-time screws
(12.60mm diameter)
•Stop balance activated by crown
•21’600 vibrations/hour
•Phillips terminal curve
•Geneva-style stud
BRIDGES AND MAIN PLATES
•Nickel silver, frosted and spotted with polished bevelling and countersinks, straight-grained flanks, blue treatment
•Flat black polished steel balance wheel bridge, polished bevelling and countersinks, straight-grained flanks
•Flat black polished gold plate under the balance wheel
MOVEMENT SIDE
•Flat black polished gold plate with relief engraved text, polished
bevelling and countersinks, straight-grained flanks with apparent
gold chatons
•Central gold plate, «GF» engraved with the limitation number
DISPLAYS
•Hours and minutes
•Small seconds
•72-hours power reserve on a sector
EXTERIOR
CASE
•Stainless steel with high domed synthetic sapphire crystal
•Hand-polished bezel, caseband with hand-finished straight-graining
•Three-dimensional, variable geometry-shaped lugs
•Transparent back with high domed synthetic sapphire crystal
•Raised polished engraving “Balancier” and “Greubel Forsey” on a hand-punched background
•Gold security screws
CASE DIMENSIONS
•Diameter: 39.60mm
•Height: 12.25mm
WATER RESISTANCE OF THE CASE
•Water-resistant 3atm - 30m - 100ft (GF uses the NIHS 92-20/SN ISO 22810:2010 standard)
CROWN
•Stainless steel with engraved and black lacquered GF logo
DIAL
•Multi-level in gold
•Sunburst blue finish hour-ring, with a visual opening for
the balance wheel, minute-circle with deep blue finish,
engraved and white lacquer filled, polished bevel
•Small seconds, engraved and lacquered with polished bevel
•Power-reserve, engraved and lacquered, hand matt lapped
•Hours, minutes, small seconds and power-reserve in polished steel,
hand-polished countersinks
STRAP AND CLASP
•Hand-sewn textured rubber
•Stainless steel pin buckle, engraved GF logo


