jcs2000
52
It is a keeper
I have the black faced version with Arabic numerals on the 18k white gold bracelet. Purchased for the look and because of the complications (annual calendar with GMT) is a great mix. The reality with Rolex is that all the models have a SS equivalent at some point. The SS version with the stick markers makes the dial cluttered and the red date indicator appears a bit askew.
To keep or not to keep?
Hi all, so, I purchased a sky-dweller in 2014, mainly because I really liked its bezel-controlled movement (cal 9001). And, that time it was only available in precious metals, so I went with the WG ivory dialed one. In general, in a watch, I value a movem...
Absolutely magnificent
I hear what you\'re saying but I love the new stainless steel white dial it looks clean and very crisp it opens up the dial more and very easy to read stunning regards,
For me the new white dial
looks cleaner and better. Have you also seen the new black dial? Best, Thomas
Trade it in
I would take it back to the dealer that you bought it from as selling it now will be rather painful. Not a great place to be in but clearly Rolex had it's reasons. Hope the AD will treat you well when taking it back in and offer you good value.
I never paid much attention to this watch, now with this release in SS, my opinion is
we will see it more often. My 2 cents about you concern if you are not into good seek it back and with the extra fund buy a second watch
I never thought I would see an SS Sky-Dweller
And having read on some forums they would never release a non precious versions I resigned it to unobtainable status but now they have done it the black version could be my first Rolex, really like the subtly of the annual calendar indication, and the bez...
Keep it...
I have been putting off getting this piece due to its price, now perhaps I can start saving for the SS version. As for you sir, I would keep it, a WG Rolex still retained a good value and people would know easily its a WG over the SS version. Same movemen...
Keep the white gold it is a stunner....I chose when judging because of its beauty and value addedness hehe cant get that with SS and although it makes it more affordable
I dont't think Rolex should of done it that way....the precious metals would have been the way to go.
Yup ..
I remember that day ... I was not hoping anything because there were so many gorgeous watches
Personally I prefer
the combination of and contrast between the white gold case and ivory dial.
Keep it, it looks great and it remains a wonderful watch.
While Rolex may have the Skydweller in SS and TT, it remains a high priced item for many. Enjoy your watch.
Two tone is $40k cheaper...
So, do you think that there is anything like $40k worth of bullion in the WG watch?
I'm just making a general comment about ,,,
... the merit of non precious metal watches. This is a good time to buy luxury watches. Technology and design is very advanced. Competition is keen. Most brands are reaching down market. OP can downgrade and pocket $25k cash. Almost enough for SS AND SS/Y...
Any idea about the ...
... long term WR of the bezel-controlled watch? Seems to me that the watch will need services more frequently because of the extra linkages into the case?
I have washed ...
it under tap water regularly for last 3 years. No problem so far. I trust their Oyster case
The most interesting Rolex imo
two of my favourite complications executed cleanly. I know the dial is not everyone's cup of tea but it is mine. I was waiting for the steel version for ages and now it is a real option for me price wise. As for your dilemma: 1. It's a great dilemma to ha...
It was and still is available in steel / white gold. This year, the new thing is that it is available in steel / yellow gold.
Now, if you are thinking to let it go, or if you are disturbed, you should let it go... Best, Nicolas
Steel/WG was never available before ...
Earlier it was a PM-only model. This year, new things are steel/WG and steel/YG. And, for the steel/WG model, only fluted bezel is WG, everything else is SS. My posted pics are for steel/WG model. Cheers,
Keep the white gold
Rolex today is anything but exclusive. Gold is the only tint of exclusivity one can add to a Rolex that is also available in steel. Besides, I prefer the heft of gold, I feel that I am wearing a WATCH. Best, Radone
Post makes no sense
to me. You probably could barely trade even your watch for the new one. Been there done too many times. If you like your watch as you do keep it.
????
The 3-year old PM watch should be worth at least $30k to a dealer. Possibly $35-40 to a direct buyer. The new SS/WG watch is only $14.4k? www.ablogtowatch.com
Should and are is the question.
You can net money but its a lousy deal. Just buy the steel/gold and have both watches. The demand for used all gold Rolexes in today's world is not too strong. Too much bling and not under the radar, the "gold" standard today. They can sell them new but t...
These numbers
look reasonable to me. And, I bought it ~ 3 years ago, before at least two price increase/currency adjustments, with a decent discount. So, even if I sell now, I won't lose much. But I think I'll keep it.
It's your watch and your decision
However, think ahead. What would you do with the cash if you trade it in for a SS/WG? What would the resell value of the gold watch be in two years time?
It is a keeper
I have the black faced version with Arabic numerals on the 18k white gold bracelet. Purchased for the look and because of the complications (annual calendar with GMT) is a great mix. The reality with Rolex is that all the models have a SS equivalent at so...
I am a fan of
the black dial WG as well. It is probably the most sporty looking model in the Sky-D PM range. I think I am going to keep my WG one. Cheers!
You excited me briefly until
I found out that it was white gold and stainless steel. That is half baked and unacceptable. Full steel or full gold for me. Half measures are unacceptable.
To be fair,
Rolex fluted bezels are always made with gold. It has something to do with the technology they use. The fluted bezel on SS datejusts are also gold. But I see your point ... I prefer only one type of metal as well. Cheers,
Hopefully, your keep the one you have
and maybe wait for the all steel w/ gold bezel only. That is the best of all worlds.
Keep it
You have the watch for you or you want other to know your is gold? Anyway the PM model are different dial!
Re-read your own words. You would be crazy to sell yours.
Very easy recommendation after reading your post. I would encourage you to add an all steel model with one of the other dials, then you will have 2 rather different looking pieces. But do not sell the one you have had and has been such a loyal companion. ...
Love the new one But
Keep the one you have. The dial is much nicer with the Roman numerals. You can always sell it later as it retains value.
Definitely keep it ..
You don't buy a Rolex to sell or replace in 3 years. If its me, and can afford it, I would buy the SS one black / Blue dial. Khaled
OMG ...
... Christies just had an auction May 15th in Geneva. Lot 245 Sky Dweller WG. Very low price!!!!!
So, price realized ...
is approx. USD 22k, which is roughly CAD 30k, whereas MSRP of that particular version of sky-d is ~45k CAD. So it seems to me like 33% off, similar to typical grey market discount on pm models. Nothing special ... unless I am missing something. And this i...
?
The new Evergold strap watches are USD45k according to the Rolex site. Looks like their prices are not holding up; to Rolex standards. Surely, the new SS models has something to do with it. You're not alone. A Lange has just issued a new Saxonia Thin 37mm...
Does it ...
specify USD on the website? I think it is displayed in local currency. Either way, I think I'll keep mine for the time being ... I gave it a lot of thought and am pretty sure in this case 1 > 2 Cheers!
Skydweller ss availibility
Saw watch in SF. The Rolex rep said availibility will be tough in ss. He said approximately half as many ss skydwellers as ss Daytona will be made in first year.