Thanks for the input

Mar 02, 2024,20:53 PM
 

I am looking at a black dial; do you have any pics to share?
Bests

  login to reply

Comments: view entire thread

 

3998p seeking advice

 
 By: DocAbe : March 2nd, 2024-18:26
Dear Friends; Thinking of getting one for myself; seeking opinion from current or previous owners in regards to aesthetics, wearability, value etc It’s small at 34mm by today’s standards; how do you think it would suit my 7” wrist? Any real life pics, wri... 

I was looking at this as a gift to myself for my 60th

 
 By: mblum3 : March 2nd, 2024-20:00
That was ten years ago. It's a very lovely piece and pretty rare in platinum. I have about the same size wrist as you. My feeling is that with watches that are a bit small, I'm ok with it. It's functional art on my wrist. If it's too large or heavy - Rich... 

Thanks for the input

 
 By: DocAbe : March 2nd, 2024-20:53
I am looking at a black dial; do you have any pics to share? Bests

I might, I'll check

 
 By: mblum3 : March 3rd, 2024-00:52
I know on Chrono24 there are a few. I may be a little detail oriented, but there are two types of numbers for the date. One is thicker and a bit rigid and one which is lighter in character (my preference - just an opinion) which allows the date window to ... 

I would seek to try it on before you buy.

 
 By: vitalsigns : March 2nd, 2024-22:09
34 mm is very small by today's standards. With a 7" wrist -- neither big nor small -- you may be disappointed. Maybe consider a 5107 or 5127 instead.

Happy 3998P silver no diamonds owner here for roughly a decade...

 
 By: trs : March 2nd, 2024-23:29
I have 6.6" wrists and prefer smaller watches with the 3998P being my smallest. While the watch is small, the dial is not. It is the same size as the dial of my 5711/1A. I use the 3998P no matter what I am wearing and wouldn't trade it for a 39mm 5227 or ... 

Thanks so much for the information

 
 By: DocAbe : March 2nd, 2024-23:47
Would you happen to know when the movement changed from 310 to 315? Best regards

Found an article

 
 By: mblum3 : March 3rd, 2024-00:59
Says the caliber 310 was used in the 3998 from 1989 through 1993. After that the 315. collectability.com

This is my 3998g. Cal.310 manufactured in 1991

 
 By: anaroku : March 3rd, 2024-04:51
my arm size is 7 inches There are two markings on the side of the case. Compared to the 34mm 3445, the 3998 feels slightly smaller in size and thickness. ...