matt.wu
13
And it's back and fixed...
Feb 26, 2013,11:40 AM
It didn't even have to go back to JLC. My watchmaker was able to handle it. It was as simple as I had hoped - he just lifted the 24-hour ring and rotated it one "notch".
Thanks for the advice, all.
Comments:
view entire thread
Please advise - Master World Geo 24-hour ring out of sync?
By: matt.wu : February 1st, 2013-00:57
Hi all, I generally like to think of myself as fairly savvy when it comes to most watches with simple complications, but this one has got me stumped. I think it's actually an issue, but thought I'd ask before I investigated with the seller/dealer. I will ...
Not correct: there is a 1 hour problem
By: Clavi : February 1st, 2013-03:09
Matt's watch on the second picture shows 5:17 on the small subdial (and on main time), but 16:17 on the time ring, so there is apparently a 1 hour sync problem between the 2 (subdial and ring), which is a factory setup default since the 2 should be aligne...
It seems that you are off by one ...
By: nilomis : February 1st, 2013-03:14
Matt, Did you tried to perform the initial sync, as was explained by an old post (Jaw)? Quote For a more balance aesthetic, the crown driving the city disc is placed at 2 o'clock instead of the 10 o'clock position. The watch need to be set only for the fi...
Thanks all - I think I will take it to JLC.
By: matt.wu : February 1st, 2013-15:49
Thanks for confirming for me. I didn't want to bring it to an AD only to have them laugh and show me how it works. I will take it in under warranty.
Sorry if you've tried this already but....
By: george r curry : February 3rd, 2013-00:57
Hi guys, Just adjusting my world geo now, with the lower crown pusher in position B you can always adjust the 24hr dial independently of the main time, is this not how you would solve your problem ? Sorry if I've misunderstood your problem. KR George
Oops
By: george r curry : February 3rd, 2013-01:05
Oh dear , yes just looked at your second picture again, there is an issue sorry I responded without checking . KR George
And it's back and fixed...
By: matt.wu : February 26th, 2013-11:40
It didn't even have to go back to JLC. My watchmaker was able to handle it. It was as simple as I had hoped - he just lifted the 24-hour ring and rotated it one "notch". Thanks for the advice, all. ...