mtvandi
269
Still running well
Hi Jeff,
Thanks for the e mail. The watch is still running about 1-2 seconds fast a day. I am much happier to have it working this well, I was worried it was just getting too fast before the adjustment I did.
To adjust it I removed the back very carefully, tried hard to not lose any screws and ever so slightly moved the swans neck screw, to slow it down. I did need to look up slow and fast in German to get the right direction going. I did this adjustment with a super small screwdriver and magnifier a couple times to fine tune it and then fully tightened the case backs screws down like a wheel lug nut pattern and that's it.
I hope this will be my extent of watch tuning 101 for a while, it is nerve racking on a nice watch like the GO Navigator. I would feel so silly handing a watchmaker a failed attempt, still in pieces. Maybe next time I will try this on beater...ha ha.
Take care,
Mark
It's been done, Mark . . .
By: Dr No : November 15th, 2007-22:38
. . . follow the thread below. glashutte.watchprosite.com Personally, I feel that the potential downside outweighs the benefits, especially if the watch in question is under warranty. I admire Jeff's technical acumen and sense of adventure, but I won't be...
That was me
By: JeffM : November 17th, 2007-16:15
I agree w/ Art Unless you have a .6 mm screwdriver, a Dissecting microscope , A good light , and a really clean environment .Don't attempt. I work in the micrometers and nanometer environment every day so it was not a problem. You might find a jeweler who...
Still running well
By: mtvandi : December 1st, 2007-20:14
Hi Jeff, Thanks for the e mail. The watch is still running about 1-2 seconds fast a day. I am much happier to have it working this well, I was worried it was just getting too fast before the adjustment I did. To adjust it I removed the back very carefully...