Bulgari

i suspect its the big side screws but how is it done? is there special tools required? pic curtsy of Ppro cheers, Ed~...  

In Kong's picture below, you can see that there is a screw on the very right and then another piece on the left with a screw slot: This must mean that you need 2 screwdrivers to unscrew this strap screw. One screwdriver to hold the screw on the left and a...  

Wow thats fast response and the pic does explain a whole lot! i t looks like a job better be done by the professionals or at least with proper tools cheers, Ed~

as it is. I just bought a fitting screw driver and was able to do it. By the way the first scratch on the screw was caused through an watchmaker at a Bulgari Boutique and I assume he had proper equipment, but maybe was not relaxed enough Oliver

is it turning counter clockwise (dial up) as releasing the crown? thx, Ed~

but from my memories the screws work like the crown. Oliver

Hi you need two screw driver to unscrew the attachment the screw at 3 o'clock side it's a long screw and at 9 it's a small one old one screwdriver and make the other one turn counterclock attention normaly they have some glue inside or if the outside of t... 

now i only need to find the fitting screw drivers to DIY Very useful instructions, thx a lot! cheers, Ed~

Your knowledge and expertise is greatly valued here. We look forward to future posts from you . Welcome!

Hello and welcome to the forums! Thanks for helping a fellow PuristS out! -MW

great forum been searching for a good one for a while am an avid collector of watches inc BV question is are the screws easier to mark / scratch on my gold Diagono as opposed to say a steel cased ?? in fact what are they made of ? i presume gold would be ... 

hello Oberon, i havn't try changing the strap yet as they r still new & i have yet to find a pair of matching screwdrivers. observing mine i ll assume gold case comes with matching gold screws & i ll recommend finding a fit screwdrivers before any... 

Oberon, Hello and Welcome! IMO if using the correct size screw driver and proper technique, it shouldn't mar or scratch the gold on your Diagono. Which Diagono variant do you have? Hope you share pics of your BVLGARI with the rest of us! -MW

Hi Oberon, Welcome to the Bulgari forum! I'll check with my sources at Bulgari regarding the Diagono screw material. Which Diagono do you have? The time/date, or GMT, or the chrono? Would be great if you could share a few wrist shots of your watch. And pl... 

Hi Oberon the one in steel are made of steel and less easy to scratched than the one in Gold (18kt) bur becarefull when you try to unscrw them we put glue lol lol lol