WPS member · Officine Panerai forum
19 replies27393 views44 photos
AnthonyTsai delivers a comprehensive report on Panerai's SIHH 2009 novelties, with a particular focus on the introduction of the new P.9000 in-house automatic movements. His detailed breakdown of the movement's characteristics and the new models it powers offers invaluable insight for collectors. This post serves as a crucial historical document for understanding Panerai's strategic shift towards entry-level in-house calibers.
Panerai's major debut at this SIHH 2009 was not the watches IMO, but the introduction of its new P.9000 movements. There are NO new complications such as minute repeater, double tourbillon, etc.
Brief summary of the P.9000 characteristics:
3 day power reserve. P.900x movements are automatic. No manual wind. The P.900x was made to be convenient for the customer - simple and tough. Watches w/ P.900x movement are priced between the ETA & P.200x watches, so it's a great strategic fit for Panerai to release this entry level in-house movement. Crystal is slightly domed and flatter - not as domed as the 1950 crystal. Increased water resistance to 300m instead of 100m water resistance found w/ P.200x. Has seconds hand zero reset feature for easy accurate setting of seconds. Has quick hour set enabling you to easily change hour hand in +/- 1 increments.
- On the bezel, the numbers are more inside and flush with the bezel.
Quick Cheat Sheet of P.900x:
P.9000 - Automatic winding, Time, Date
P.9001 - Automatic winding, Time, Date, GMT, Power Reserve Indicator on back
- P.9002 - Automatic winding, Time, Date, GMT, Power Reserve Indicator on dial
PAM312
- 44mm 1950 Luminor Marina automatic w/ date.
- P.9000 movement
- estimated retail $7,350
PAM328
- same as the above PAM312 but just the bracelet version
- estimated retail $8,550
PAM305
- 47mm Submersible in titanium
- Dial is similar to a historic watch (notice the hour markers at 12 and 6 o'clock)
- P.9000 movement
- estimated retail price $9,600
PAM320 (strap version) & PAM 329 (bracelet version)
- 44mm Luminor Marina GMT w/ Power Reserve on the BACK
- P.9001 movement
- estimated retail price PAM320 - $8,850
- estimated retail price PAM329 - $9,900
Notice the power reserve indicator in the below picture. The power reserve indicator turns black to red. When it's red, then it's time to wind up the watch!
bracelet version PAM329
PAM321 (strap version) & PAM 349 (bracelet version)
- Same specs as the above PAM320 but this time the Power Reserve Indicator is on the DIAL
- P.9002 movement
- estimated retail price PAM321 - $8,850
- estimated retail price PAM349 - $9,900
Below is a comparison picture of the old bracelet (left) and new bracelet (bracelet). Notice that the 1st bracelet piece that connects to the case is more curved in the old bracelet on the left? This is because the case is not as curved at this section.
Take a look at the below 2 pictures. The picture below shows the new end piece of the bracelet which connects directly to the case. See the part that sticks out at the bottom of the piece at the left and right corners? These 2 protruding parts are for sitting on the case now resulting in a more sturdy and better fit for the bracelet.
In the below picture, notice the milled out section between the lugs where the above end piece will connect with the milled out section on the case. You will now see these milled out sections in all Luminor cases which have bracelets. Also, models which come with the option of both strap and bracelet will have these milled out sections as well.
This bracelet milling is only on 44mm Luminors since there are no 47mm Luminor bracelet versions yet. So if Panerai ever does make a 47mm bracelet version, I'm sure those models will have these milled out sections.
PAM326 (strap version) & PAM327 (bracelet version)
- Daylight Chronographs w/ the Firenze blue dial
- Base is 7753 Valjoux movement
- Titanium case
- Quick date pusher at 10 o'clock
- estimated retail price PAM326 - $9,300
- estimated retail price PAM327 - $10,650
PAM296
- 44mm automatic Luminor Marina
- The PAM296 is the same model as the already existing PAM240 w/ brown dial but this time with bracelet instead of strap.
- Estimated retail price $8,250
PAM298
- 40mm Luminor Marina on bracelet. It's the same thing as a PAM50 but now on a bracelet
- Estimated retail price $7,050
PAM341
- Radiomir Egiziano 60mm in Titanium (aka "Egyptian")
- Uses the 8-day P.2002 movement but modified to remove GMT & linear power reserve indicator
- 300 pieces only
- Available through both retail network and Panerai boutiques
- Strap looks to be a 6 or 7mm strap. Very long strap.
- 26mm strap width- Sandwich dial with slight vintage looking brown colored luminova that is found on the PAM249
- Strap has the sewn-in "GPF - Mod Dep" buckle
- Ball on the bezel at 12 o'clock is super luminova covered with a sapphire cap
- Bi-directional turning bezel
- estimated retail price $28,500
PAM332
- 2009 Regatta Rattrapante Chronograph
- black DLC coated
- 44mm 1950 Luminor Marina case
- 500 pieces
- Notice the super luminova hour blobs and numerals are thicker
- estimated retail of $16,500
PAM28
- 44mm Luminor re-edition of the PAM28
- Black DLC coated
- Power Reserve display has been slightly modified
- Notice there is no "Power Reserve" writing on the dial. This is Panerai's first PR watch in this family without this writing.
- 1000 pieces
- estimated retail price of $9,500
PAM319
- Rose gold 47mm 1950 Luminor Rattrapante Chronograph
- Uses the P.2006 8-day rattrapante movement
- Brown dial
- Chrono pushers are on the left side instead of right side of the case because the crown guard is in the way
- 300 pieces limited edition
- Movement # is engraved in the movement plate as well as caseback. Other Panerai models which have this feature are the Panerai Tourbillons and Radiomir Minerva pieces.
- estimated retail price of $43,500
Now let's go and take a look at the Ferrari Engineered by Panerai watches.
These new Ferrari pieces look different than the prior years because the bezel is now thinner so the dial looks larger. A very improved look if I may say so. Good job Ferrari design team!
Cases are all still the usual Ferrari 45mm size.
FER28 - red Scuderia - basic chronograph - estimated retail price of $9,600
FER34 - yellow Scuderia - basic chronograph - estimated retail price of $9,600
FER26 - yellow dial - rattrapante chronograph - NO DLC coating - estimated retail price of $14,700
FER33 - red dial - rattrapante chronograph - steel case w/ DLC coating - regular production piece - estimated retail price of $16,200
Last of the Ferrari pieces I'll be sharing with you are the 2 limited edition pieces - the Ferrari California pieces.
FER30 - Ferrari California - flyback chronograph - 300 pieces - estimated retail price of $16,500
FER38 - Ferrari California - regular chronograph - 100 pieces - DLC coating - estimated retail price of $12,600
And lastly, there are 2 new Panerai Tourbillons. Watches are exactly the same but now offered in different metals:
PAM330 - 48mm Radiomir Tourbillon in Pink Gold - 100 pieces - estimated retail price of $133,500
PAM331 - 47mm Luminor Tourbillon in Titanium - 150 pieces - estimated retail price of $121,500
(C) PuristSPro.com , 2009. All rights reserved.
All text and pictures may NOT be reproduced on any other site without direct permission from PuristSPro.
Copyright January 2009 - Anthony Tsai & PuristSPro.com - all rights reserved PuristSPro Homepage | ThePuristS Homepage
Comments, suggestions, and corrections to this article are welcome.
This message has been edited by AnthonyTsai on 2009-06-18 09:56:14
About the Panerai Luminor 1950 3 Days GMT Power Reserve Automatic Ref. PAM321
The PAM321 represents Panerai's Luminor 1950 3 Days GMT Power Reserve Automatic within the brand's Luminor 1950 series. This reference combines GMT functionality with power reserve indication in a three-day automatic configuration.
The watch features a 44mm brushed steel case with polished steel bezel and measures to 300 meters water resistance. A 2.6mm sapphire crystal protects the dial. The timepiece operates on the Calibre P.9002 movement, providing the GMT and power reserve complications alongside the three-day power reserve capacity.
This reference appeals to collectors seeking a substantial steel sports watch with travel-friendly GMT functionality. The 44mm case size positions it within Panerai's standard sizing range, while the brushed steel construction offers durability for regular wear. The combination of GMT and power reserve complications makes this reference suitable for those requiring practical travel features in their timepiece selection.
Specifications
- Case
- Brushed Steel
- Diameter
- 44mm
- Water Resist.
- 300m
- Crystal
- 2.6mm Sapphire
About the Panerai Luminor 1950 3 Days Automatic Ref. PAM328
The PAM328 represents the Luminor 1950 3 Days Automatic within Panerai's Luminor 1950 series, featuring the brand's P.9000 automatic movement in a 44mm steel case configuration. This reference combines the characteristic Luminor 1950 case architecture with three-day power reserve functionality.
The 44mm case is constructed from brushed steel with a polished steel bezel, fitted with a 2.6mm sapphire crystal. Water resistance extends to 300 meters. The watch is powered by the Calibre P.9000 automatic movement, which provides the three-day power reserve indicated in the model designation.
This reference appeals to collectors seeking a substantial steel sports watch with extended power reserve capability. The PAM328 occupies a position within the core Luminor 1950 offerings, combining the series' distinctive case proportions with automatic winding convenience. The brushed steel case treatment and polished bezel create a contrasting finish combination typical of the model range.
Specifications
- Case
- Brushed Steel
- Diameter
- 44mm
- Water Resist.
- 300m
- Crystal
- 2.6mm Sapphire
About the Panerai Luminor Chrono Daylight Ref. PAM327
The Panerai Luminor PAM327, introduced at SIHH 2009, represents a significant evolution within the Luminor collection by integrating Panerai's new generation of in-house movements. This reference is notable for its use of titanium for both the case and bracelet, offering a lighter alternative to steel models while maintaining the robust Luminor aesthetic. It was positioned to bridge the gap between models using third-party movements and Panerai's higher-end P.200x calibers, making in-house technology more accessible.
This model features a 44mm brushed titanium case, paired with a brushed titanium bezel. The watch is fitted with a sapphire crystal, which is slightly domed. Powering the PAM327 is the automatic Panerai Calibre OP XII, which provides a 42-hour power reserve. The construction ensures a water resistance of 300 meters, an upgrade from some earlier Luminor models.
The PAM327 appeals to collectors seeking a durable, lightweight Panerai with an in-house movement and a full titanium bracelet. Its introduction marked a strategic move for Panerai to expand its in-house movement offerings across a broader price spectrum. The combination of titanium construction and enhanced water resistance makes it a practical choice for daily wear, while its movement signifies a step towards greater manufacturing independence for the brand.
Specifications
- Caliber
- OP XII
- Case
- Brushed Titanium
- Diameter
- 44mm
- Dial
- Black
- Water Resist.
- N/A
- Crystal
- 2.5mm Sapphire
About the Panerai Luminor Chrono Daylight Ref. PAM326
The PAM326 represents Panerai's execution of the Luminor Chrono Daylight within the Luminor Chrono series. This reference combines chronograph functionality with the brand's signature case architecture in a titanium construction.
The watch features a 44mm brushed titanium case paired with a matching brushed titanium bezel. The timepiece is powered by the Calibre OP XII movement and protected by a 2.5mm sapphire crystal. Water resistance is rated to 100 meters.
This reference appeals to collectors seeking a lightweight alternative within Panerai's chronograph offerings. The titanium construction provides reduced wrist presence compared to steel variants while maintaining the distinctive proportions of the Luminor case. The PAM326 occupies a specific position for those prioritizing material properties over traditional steel construction in their Panerai chronograph selection.
Specifications
- Case
- Brushed Titanium
- Diameter
- 44mm
- Water Resist.
- 100m
- Crystal
- 2.5mm Sapphire
About the Panerai Luminor 1950 3 Days GMT Automatic Ref. PAM329
The PAM329 represents Panerai's Luminor 1950 3 Days GMT Automatic within the Luminor 1950 series, offering dual time zone functionality in the brand's characteristic case architecture. This reference combines GMT complications with the three-day power reserve capability found across this model line.
The 44mm brushed steel case houses the Calibre P.9001 automatic movement and features a polished steel bezel. Construction includes a 2.6mm sapphire crystal and water resistance rated to 300 meters. The case materials present a contrast between the brushed finish of the main case body and the polished bezel treatment.
This reference appeals to collectors seeking GMT functionality within Panerai's steel case offerings. The PAM329 occupies a position for those requiring travel watch capabilities while maintaining the proportions and water resistance specifications associated with this case size. The automatic movement eliminates manual winding requirements while preserving the extended power reserve characteristic.
Specifications
- Case
- Brushed Steel
- Diameter
- 44mm
- Water Resist.
- 300m
- Crystal
- 2.6mm Sapphire
Key Points from the Discussion
- The 328 and 312 are predicted to be huge sellers due to their entry price and simple design, though one user expresses a preference for a solid caseback over a power reserve indicator on an automatic movement.
- The P.9000 movement is praised as a great solution for entry-level Panerai watches, replacing ETA movements, and the 341 Egiziano is highlighted as a true collector's item.
- A question is raised regarding the future of the 233 reference with the introduction of the new P.9000 movements and GMT models.
- AnthonyTsai confirms that the P.200x PAMs, including the 233, will remain in production, as the P.900x watches are positioned as entry-level in-house options.
- A user inquires if Panerai plans to integrate the P.900x movements into Radiomir cases in the future.
- AnthonyTsai speculates that P.900x movements will likely appear in Radiomir cases in subsequent years, as it would be illogical to limit them to only the Luminor 1950 case.
Advertisement
Continue the conversation
This thread is active on the Officine Panerai forum with 19 replies. Share your knowledge with fellow collectors.
Join the Discussion →
