Makilla
1353
Ceratanium is actually blasting the titanium under a very high temperature!
Apr 07, 2021,15:08 PM
The blasting effect under severe temperature results in a dark grey almost black color. It’s not a plating like PVD/DLC nor as hard as ceramic. They presume that it’s as light as titanium while being tough like ceramic but in fact it’s not. It will still scratch more than ceramic for sure but at least it’s not as brittle.
Just put it this way, anything can eventually scratch. Even diamonds. But if you want something tougher than DLC coating or ceramic are definitely tougher than ceratanium.
Laurent
Comments:
view entire thread
Calling IWC ceratanium watch owners...
By: Fat Bastard : April 7th, 2021-06:30
Dear all, I had a pretty nasty experience with my Tribute to 3705. During a strap change made by the IWC sales rep, the back of the case was scratched by the spring bar. The IWC staff insisted that it’s not a scratch by a deposit of steel.... They failed ...
Figures!
By: India Whiskey Charlie : April 7th, 2021-07:33
IWC has claimed that Ceratanium is some new alloy they created...
By: India Whiskey Charlie : April 7th, 2021-10:26
Personally and without confirmation, I thought it was ceramic coated titanium because ceramic coating has existed for a while. The fact that you see gray metal under the black confirms that but who really knows?
IWC
By: Sweat dream : April 7th, 2021-07:13
Surprise surprise. Totally unacceptable for a manufacturer
Many thanks for the clarification however...
By: Fat Bastard : April 7th, 2021-18:05
IWC website is very misleading to put it politely: “ The latest innovative material from Schaffhausen is Ceratanium® (ceramized titanium). The new material is as light and tough as titanium but at the same time as hard and scratch-resistant as ceramic. Ce...
Reality
By: Sweat dream : April 8th, 2021-01:37
IWC is the new ENRON
Pls.ellaborate
By: @lberti : April 21st, 2021-14:29
What has wic with enron or north korea? Your wording surprises me a little bit. Not in a nice way i must say
What is interesting in this description...
By: eklektik : April 8th, 2021-04:23
.... is that there is no addition to the titanium. It is simply a surface heat treatment of a titanium part... Not much new here I am afraid, some basic surface tempering, some old yet efficient metallurgy techniques to harden a metal. Best, E.
Exactly! It’s part of their marketing strategy!
By: Makilla : April 8th, 2021-10:28
Especially when they tell you: a special titanium alloy made specifically for IWC! That’s funny coz I’m 100% sure it’s the classic grade 5 titanium alloy but with the heat process they will harden the surface and make more scratch/wear resistant. Natural ...
A real sting
By: Sweat dream : April 8th, 2021-13:30
What’s the next step with IWC?
Big Pilot Ceramic “scratch” story
By: roundel : April 11th, 2021-11:27
My Big Pilot Miramar ceramic case had a “scratch” on the side of the case. Upon inspection I became convinced that it was a deposit instead of a gouge. I tried lots of techniques but finally found that automotive paint rubbing compound and lots of elbow g...