Rolex Bracelet Repair Tool Guide

Jocke - Bad Santa presents a detailed photographic guide to the specialized tools used for repairing and rebuilding Rolex Jubilee and Oyster bracelets. His post offers a rare glimpse into the intricate process of restoring these iconic bracelets, highlighting the precision required for such delicate work.

Here are some tools to repair/rebuild Rolex Jubilee & Oyster bracelets.

And some pins that will do the work.

I start to hang up the bracelet to get a fair picture how the stretch is.

Parts that will take it apart is made so it will not scratch the links or slip.

So lets start the work and put the bracelet into the tool.

Here we can see how nice it attach to the links.

Then it looks the same at the other side and then just pull it apart by turning the threaded knob at the side.

Here we can see how good the fit is on the tool.

The pins are still in the one link.

On this brcelet, the pins are not as worn as they usually are, so we may not see much of a difference on the bracelet on this example.

A plier are required to pull out the pins and you turn the tool to attach the link part.

One of the pin is ok and the other have some wear.

Here are 3 link pieces in parts.

New pins in the side link presses in place like this.

So I start to press in the pins into the side link.

Then I have to press back the other side link.

And there we go.

What did I learn from this? It is much more fine mechanics than I thought. It takes a little patience to get things together.

Then you have to be careful to keep track of the location of the side links as these are different sizes.

Now, this link was an old obsolete thing, so it is good to practice before I start to fix these links for real.