
AnthonyTsai introduces the Panerai Luminor 1950 Rattrapante 8 Days Titanio (PAM530), a significant release from Pre-SIHH 2013 that blends classic Panerai aesthetics with advanced haute horlogerie. His initial post highlights the technical sophistication of this split-seconds chronograph, featuring an in-house P.2006 movement and an impressive eight-day power reserve. This article explores the watch's design and technical merits, as well as the community's initial reactions to its dial and material choice.
Officine Panerai presents the new Luminor 1950 Rattrapante 8 Days Titanio [PAM530], a sophisticated haute horlogerie model in which the classic Panerai design is perfectly combined with the technical aspects of high quality sports watchmaking.
PANERAI LUMINOR 1950 RATTRAPANTE
8 DAYS TITANIO - 47mm

The Luminor 1950 Rattrapante 8 Days Titanio is a split-seconds chronograph with vertical clutch and twin column wheels, and it offers numerous functions that are characteristic of top-of-therange mechanical watchmaking, all assembled in the P.2006 movement, entirely developed and created in the Officine Panerai manufacture in Neuchâtel.
The split-seconds function, also known as rattrapante, operates two hands that are superimposed and partially independent: the first is entirely controlled by the button at 8 o'clock, which starts, stops and resets the chronograph hand; the second, controlled by the button at 10 o'clock, is used for measuring partial times or a second event simultaneous with the first. To make it easier and clearer to read, the hand of the small minute counter moves in jumps instead of continuously. The P.2006 hand-wound movement has a long power reserve of eight days, a traditional duration for Panerai watches. This is achieved by means of a special patented system of three spring barrels. The remaining power reserve can be read on the dial from a linear indicator above the number six.

To enable the watch to be synchronised perfectly with a reference signal, the P.2006 movement also has a seconds reset function, which zeroes the seconds hand by stopping the balance wheel until the winding crown has been returned to the running position.
The Luminor 1950 Rattrapante 8 Days Titanio has a brushed titanium case 47 mm in diameter, fitted with the classic lever device which hermetically seals the winding crown to ensure waterresistance to 10 atmospheres (equivalent to a depth of about 100 metres).
On the back of the case, in the centre of the 12-sided caseback, is a sapphire crystal window through which the elegant finish of the P.2006 movement can be seen.

The bezel is made of polished titanium and surrounds a large black dial of great simplicity and sporting elegance. The structure of the dial consists of two superimposed discs with a layer of Super-LumiNova® between them: a type of construction which has been characteristic of Panerai watches since the 1930s, it provides great legibility and visibility even in situations of very low light, such as underwater.
Identified by the reference PAM00530 and produced in a limited edition, the new Luminor 1950 Rattrapante 8 Days Titanio is supplied with a rubber strap. It is part of the of the Officine Panerai Specialities collection.
LUMINOR 1950 RATTRAPANTE 8 DAYS TITANIO – 47mm
Movement: Hand-wound mechanical, Panerai P.2006/3 calibre, executed entirely by Panerai, 13¾ lignes, 9.6 mm thick, 34 jewels, Glucydur® balance, 28,800 alternations/hour. KIF Parechoc® anti-shock device. Power reserve 8 days, three barrels. Double column wheel, 356 components.
Functions: Hours, minutes, small seconds, linear power reserve indicator, seconds reset device, split-seconds chronograph.
Case: Diameter 47 mm, brushed titanium. Brushed titanium buttons with engraving and polished edges for the split-seconds function at 10 o'clock and for the chronographic functions at 8 o'clock.
Bezel: Polished titanium.
Back: Visible through the sapphire crystal
Device protecting the crown: (protected as a trademark) Brushed titanium.
Dial: Black with luminous dots and hour markers. Minute counter at 3 o'clock, seconds at 9 o'clock, linear power reserve indicator at 6 o'clock, central chronograph and split-seconds hands. Chronograph seconds scale on the outer edge.
Crystal: Sapphire, formed of corundum, 2 mm thick. Anti-reflective coating.
Water-resistance: 10 bar (~ 100 metres).
Strap: PANERAI personalised rubber strap and large-size brushed titanium buckle. Supplied with a second interchangeable strap, a tool to change the strap and a steel screwdriver.
Reference: PAM00530.
*Officine Panerai is not the owner of the Glucydur®, KIF Parechoc® and Super-LumiNova® trademarks.
Press Release
The Panerai PAM100 is a distinctive model within the brand's offerings, notable for its departure from the more utilitarian aesthetic often associated with Panerai. This reference presents a refined interpretation, emphasizing precious materials and a sophisticated dial treatment. It caters to collectors seeking a Panerai that blends the brand's characteristic case design with a luxurious presentation, distinguishing it from tool-watch oriented references.
This particular reference features a 40mm pink gold case, providing a substantial yet wearable presence. The watch is equipped with a mechanical movement, offering a power reserve suitable for daily wear. A sapphire crystal protects the dial, ensuring clarity and scratch resistance. The construction reflects a commitment to traditional watchmaking standards, with attention to both material selection and finishing.
The PAM100 appeals to collectors interested in Panerai's exploration of high-end materials and finishes. Its diamond dial further positions it as a piece for special occasions or as a statement watch within a collection. This reference represents a facet of Panerai's production that broadens its appeal beyond its traditional military-inspired designs, offering a more opulent option for enthusiasts.
the in house rattrapante made its way into a non precious metal case, which is exciting news. However, I'm having a slight reservation about the dial... Somehow I think the dial on the PAM319 is a bit more balanced, what do you think?
Everybody, by now, knows how I dislike models like this one though I understand that, the brand has to...continue it's own evolution, into the world of haute horologerie. I find the use of the 2533's elements on the dial, a bit too much. Considering that the subdials and linear Power Reserve make the dial a bit heavy already, I think the 2533 "motif" overlap are definetly...too much of too much.. :-)
Dial looks a tad too busy to my eyes but I'll reserve judgement until I see one in the flesh or some real-life pics. Cheers, Anthony
This thread is active on the Officine Panerai forum with 3 replies. Share your knowledge with fellow collectors.
Join the Discussion →