skyeriding
900
One thing I can think of is:
Inherently, due to the alarm function taking up 1/6 markings between hours (10 minutes each segment), it means it's difficult to accurately read minutes off the dial (which needs a 1/5 marking scale instead).
Regards,
skyeriding
The position of the main crown and pusher
To set the alarm, you push the alarm pusher all the way in, which pops the main crown all the way out. You can then set the alarm hand. The crown is in the same position--all the way out--that it was in when setting the time, but now it is setting the ala...
One thing I can think of is:
Inherently, due to the alarm function taking up 1/6 markings between hours (10 minutes each segment), it means it's difficult to accurately read minutes off the dial (which needs a 1/5 marking scale instead). Regards, skyeriding
Let's try.
Tritium on some numerals is in bad condition? Hands are dirty? Strap is not the right size? Vte
Have all four hands been replaced? [nt]
Did it originally look like this? Best, NickO ...
OK, another try...
Could you be referring to the slight gap between strap and 10:30 lug—which doesn't seem to be there at 4:30/7:30? In other words, the top lug spacing seems to be off. FH
Seconds hand always off
As they disected 5 minutes by 6 segments, the seconds hand will never match the minuterie.
Hmmmm, I can easily read the seconds on that watch
So I’m not sure I’d categorize that as an “error” more so a design decision that you personally disagree with. NickO
Easy - you have hour indices
In the picture you posted, the seconds are at 10 secs because they align perfectly with the hour 2. Now, it would move 20%, 40%, 60%, 80% towards the hour 3 and when it reaches it that’s then 15 seconds. It really is not that difficult to look at the seco...
I guess he wants both indices, Breitling style
I personally feel that would unnecessarily clutter the dial as it’s not difficult to read off seconds when you have hour indices to judge seconds off of. And you’re right, the point of the watch is the alarm so that needs to be easy to read and set. That’...
So what do you make of this?
Ikepod Horizon with no minute or hour markers, a dreadful error? I think the Ikepod design team would disagree with you. NickO ...
Actually the watch has seconds indicators...
They are just not standard... From 0-60 seconds in increments that are multiples of 5, and in-between using non-standard 5/6 second increments e.g. from 10-15 seconds as follows: 10, 10 5 / 6 , 11 2 / 3 , 12 1 / 2 , 13 1 / 3 , 14 1 / 6 , 15 I would consid...
