Front wheel bearing replacement Audi Q5.
I start by removing the wheel.
The driveshaft bolt need some heat.
It's hot.
Furthermore, I remove the brake disc & brake caliper. Note how the light metal corrodes, which means that forces are required to separate the parts.
So I bring out the tools.
I start by removing the hub.
It went well. Now the drive shaft is loose so I can reach the bolts on the back more easily.
When the bolts are unscrewed, I use them from the other direction in the same threads when I bolt the plate.
Furthermore, I pulled off the bearing housing in the same way as the hub and it was firmly attached.
Here you can see how the correction takes on the metal.
Here I pull off the bearing part that remains on the hub.
Then just put the parts together.
Then I take another press to help.
And there it was all complete.
Assembly takes place in reverse order.
A nice job when you have the right equipment. T here are films on Youtube where people do it with a sledgehammer, it will not be quite the same.